Hermetic packages offer unrivaled protection for the photodiode chip, and have the advantage, due to the number of standard can base (or header) pin out configurations, of allowing multi-element termination within a single package outline.
In addition to the range of single chip photodiodes, Silonex produces dual and quad photodiodes. These devices are useful in position sensing applications. Our building block program allows further chip and configuration options.
Most package styles are available with filters for spectral enhancement. BG filters are used to correct the photodiodes response to nearly that of the human eye. IR filters are used to aid signal discrimination where high or variable lighting conditions exist.
Contact your representative for more information.
| SLD-68E-- | SLD-68HF-- | SLD-68HL-- | SLD-67HF-- |
![]() |
![]() |
![]() |
![]() |
| Product Datasheet | Package Type | Short Circuit Current | Breakdown Voltage | Junction Cap. | Typical Rise/Fall Time | Area | ||
| Min. (µA) | Typ. (µA) | Typ. (V) | pF | Tr (µsec) | Tf (µsec) | mm² | ||
| SLD-67HF2 series | TO-5 | 600 | 900 | 50 | 350 | 8.0 | 10.0 | 9.8 |
| SLD-68E1 series | TO-46 | 150 | 225 | 50 | 40 | 1.0 | 1.5 | 2.0 |
| SLD-68EBG1 series | TO-46 | 7.5 | 11 | 50 | 40 | 1.0 | 1.5 | 2.0 |
| SLD-68HF1 series | TO-46 | 110 | 130 | 50 | 40 | 1.0 | 1.5 | 2.0 |
| SLD-68HFBG1 series | TO-46 | 6 | 10 | 50 | 40 | 1.0 | 1.5 | 2.0 |
| SLD-68HL1 series | TO-46 | 300 | 450 | 50 | 40 | 1.0 | 1.5 | 2.0 |
Short Circuit Current irradiance Ee=25mW/cm². The light source is a frosted Tungsten incandescent lamp @ 2854°K
Breakdown Voltage measured with IR = 100µA
Junction Capacitance measured with VR = 0 Volts and F=1MHz.
Rise/Fall Times measured with RL = 1 Kohm.
If you want a faxed copy of a data sheet please contact your local Silonex office.